Simple! How to Know if Lawn Mower Blade is Upside Down? I’ve done this myself in the past when using a blade that wasn’t stamped. If you know for sure that your mower blade is the right way up before you remove it to sharpen it, you can mark the grass side yourself to avoid any confusion when it comes time to re-install it. Sharpening Your Blade: A Quick Trick to Re-Install the Right Way Up If it does, then you have the correct lawn mower blade position.
If on the right side, move the blade in a counterclockwise direction, and if on the left side, move it in a clockwise direction.) When doing this, this sharp edge of the blade should be the edge that leads. With the mower tipped on its side, move the blade towards you (the direction of the blade will depend on whether the mower is tipped on its right side or left side. When you have your mower tipped over and you’ve attached the blade and tightened up the bolt, there’s a quick test that you can do to help you figure out if you’ve got an upside-down mower blade or you’re good to go. Sharp Side of the Blade Moves Towards You So when installing your blade, you want to make sure these “wings” are pointing upwards towards the underside of your deck, and the sharp side of the blade is the side that is closest to the grass. This raised edge is what “lifts” up your clippings once they’ve been cut into the air vacuum of the deck so they can be directed into your grass catcher or out the discharge chute. The blunt side will usually have a raised edge, rather like wings. If you look at your blade, you’ll notice there’s a sharp side (the cutting edge) and a blunt side. If you don’t see anything stamped onto the metal, there are still a number of ways to tell which side of the lawn mower blade is up… Sharp Side of Your Blade Closest to Ground If it is, you’ve just hit the jackpot as you now know for sure which side is up. Have a look to see if this is the case with your blade. Lots of mower blades have something like “Grass Side” stamped directly onto the blade. This can be one of those “duhhh” moments. Here are my favorite tricks to figure out which way a lawn mower blade goes on: It’s Stamped on Your Blade I’m not really a betting man, but a 100% chance of winning sure sounds good… But there are a few very simple tricks that you can use to get it right 100% of the time.
If you have no idea what you’re doing, you’ve got a 50-50 shot at guessing right. How to Know Which Side of the Lawn Mower Blade is Up? The flat side of the blade should always be facing the grass, and any twists or mulching teeth should be facing the lawn mower deck.
a regular blade, all lawn mower blades have to be orientated the same way when installing a blade on a lawn mower. Regardless if you have a mulching blade vs. 6 Final Thoughts: Be Careful When Installing Your Mower Blade Which Side of the Lawn Mower Blade is Up? (The Short Answer)
0 kommentar(er)
